The Quickest Field Ever for TREMEC Stick Shift Shootout

The stage was set at the Whipple Superchargers 2023 NMRA World Finals for the TREMEC Stick Shift Shootout drag racing finale of the season. The build up for the third shootout of the season had everyone revving with anticipation to see who would show up, if any grudges from the previous 2023 shootouts would carry over to the season showdown and, when the tire smoke cleared, would we see a repeat or first-time winner? Read More “The Quickest Field Ever for TREMEC Stick Shift Shootout”

Get Ready for the Final TREMEC Stick Shift Shootout of 2023

The first two TREMEC Stick Shift Shootouts of 2023 exceeded expectations on all fronts, and the finale at the NMRA World Finals and Holley Intergalactic Ford Festival at Beech Bend Raceway is already shaping up to be an all-out showdown of stick shift racers from both sides of the Mason-Dixon line. Read More “Get Ready for the Final TREMEC Stick Shift Shootout of 2023”

TREMEC Stick Shift Shootout Winner Scott Triolo’s 1985 Ford Mustang GT

Scott Triolo made it two in a row TREMEC Stick Shift Shootout wins at NMRA Norwalk, thanks to great driving skills and his well-built, well-tuned 1985 Ford Mustang GT. His four-eye Fox Body wasn’t the fastest in the field, but it was consistent, predictable and the perfect steed to put Scott back into the winner’s circle. Read More “TREMEC Stick Shift Shootout Winner Scott Triolo’s 1985 Ford Mustang GT”

TREMEC GT500 Street and All-Female True Street Highlights from the 2023 NMRA 25th Anniversary Ford Homecoming Drag Race

The 2023 NMRA 25th Anniversary Ford Homecoming was host to some great TREMEC-sponsored drag racing action. In addition, the always popular TREMEC Stick Shift Shootout, TREMEC also sponsored the All-Female True Street Showdown and 2020-up GT500 Street Shootout. Read More “TREMEC GT500 Street and All-Female True Street Highlights from the 2023 NMRA 25th Anniversary Ford Homecoming Drag Race”

TREMEC Stick Shift Shootout 2023 at the NMRA Ford Homecoming

The second TREMEC Stick Shift Shootout of 2023 rolled into Summit Motorsports Park as part of the NMRA Ford Homecoming and 25th Anniversary Celebration with high expectations for some great drag racing excitement. The weather was nearly perfect all weekend, and the True Street field had 44 manual transmission cars out of 104 total entries. The TREMEC Stick Shift Shootout field was tight, with one 9-second average elapsed time (E/T) car followed by five 10-second cars and two 11-second average Mustangs. There was the usual amount of drag racing poker being played during the True Street time trials, with driver’s running different strategies to get an average E/T that would give them the best chance at winning with the Stick Shift Shootout’s staggered-start format. Read More “TREMEC Stick Shift Shootout 2023 at the NMRA Ford Homecoming”

Five Questions with NMRA Co-Founder Steve Wolcott

2023 marks the 25th anniversary for the National Mustang Racing Association (NMRA). The year was 1999, and the Mustang performance and racing world was like the Wild West. Multiple series were popping up as popularity surged for both the new Mustang and the not-so-old Fox Body Mustang. The spectator parking would be as full of Mustangs as the racer pits, and events were as fun as rock concerts. It was this fertile ground that Co-Founder of the NMRA Steve Wolcott got together with the right backers to start what would become king of Mustang drag racing events. TREMEC was there from the beginning to support the series and TREMEC-equipped racers as they grew a whole new segment of stick shift drag racing. Read More “Five Questions with NMRA Co-Founder Steve Wolcott”

Choosing the Right Clutch to Go with Your TREMEC Transmission

Choosing the correct clutch for your car or truck is crucial for getting the best performance and driving experience with your TREMEC 5- or 6-speed manual transmission. With a clutch not suited for your car or truck’s powertrain and driving conditions, you’ll end up with not just a poor driving experience, but also increased risk of breaking drivetrain components. In race situations increased risk of clutch failure at a crucial moment that could cost you a victory. The wrong clutch means when you try to shift your own gears all you’re going to get is a grinding reverberation though the shifter followed by some choice expletives.

“Customers will often choose a clutch based on the horsepower rating and not factor in the environment the vehicle will be used in,” says Brian Gwin, Sales Director for McLeod Racing “For example, choosing a properly rated clutch for the horsepower they are making, but choosing the ‘street’ version when they intend on driving the vehicle on the street AND taking it to the track.”

When selecting a clutch for your car or truck, there are three factors to consider:

  • Horsepower and torque output of your engine
  • Driving conditions/environment
  • RPM range engine will run at during performance driving

Clutch companies rate their clutch kits for how much horsepower/torque the clutch can handle and not slip while also having a normal clutch life. Using a clutch that’s not rated for the amount of power your engine makes means you’ll end up with clutch slippage when peak power is reached. The clutch slipping means not all the power is going to the transmission and eventually the rear wheels. It also means an increased amount of friction material on the clutch disc will be worn off, leading to premature clutch failure.

Choosing the Right Clutch to Go with Your TREMEC Transmission
These are the clutch discs from a McLeod RXT1200 dual-disc clutch system for a Ford Modular V8. It’s rated to handle up to 1200 horsepower. The disc on the left is brand new, while the disc on the right is a worn disc from a 2003 Mach 1 Mustang making 1000+ horsepower and raced on the dragstrip along with street use. The driving conditions for a vehicle are a major factor in clutch selection and as it pertains to the clutch discs. In a racing environment such as this disc was subject to, a street clutch would be burnt up in quick order. The RXT disc uses ceramic-lined clutch material to better handle the rigors of horsepower and racing while still being street friendly. Clutch companies all offer different discs designed to suit a variety of driving conditions that use specially formulated/designed friction materials so the clutch works properly, reliably and for a realistically expected lifespan relating to the application.

Next up, what are you going to be doing/how will you be driving your TREMEC-equipped vehicle? A car or truck that will only be driven on the street with occasional “spirited” driving won’t require the same kind of clutch that a street/strip or dedicated race vehicle requires. On the dragstrip or street with drag racing-style hard launches means the clutch sees more clutch dumps and sudden shocks of power then the more gentle engage a clutch sees on the street. The clutch disc, pressure plate and flywheel all have to be rated for handling the power of such launches plus the heat generated by this kind of driving. For cars seeing autocross or full road course activity it’s the same. But for street-only vehicles if you choose a clutch that’s “too heavy” and meant for harder use and way more power than your engine makes, drivability can be hurt just as much as not having enough clutch. Clutch engagement will be more aggressive and likely bog down the engine possibly to the point of stalling. You’ll also notice more effort needed by your left leg to work the clutch as well. 

Choosing the Right Clutch to Go with Your TREMEC Transmission
Modern clutches use a diaphragm-type pressure plate. This design reduces pedal effort for easier driving without sacrificing clamping force for clutch proper clutch engagement. The strength of the pressure plate in a given clutch kit will set by the manufacturer for the application its design for, and how much theoretical clamping force will be needed to handle the specified horsepower rating.

The last point to consider is what RPM range your engine will be running at during performance driving. If you’re driving in a high RPM environment such as drag or road racing/autocross, you want to select a clutch that can handle the rigors and extra heat generated by that kind of driving. Similar to brakes when they overheat, a clutch that overheats won’t function properly or not at all. And for RPM, with higher RPM applications a different friction material disc will be needed compared to more street-oriented clutch discs.

Choosing the Right Clutch to Go with Your TREMEC Transmission
For today’s 1000+ horsepower legit street cars that also see regular track use, dual-disc clutches handle both without significantly increasing pedal effort to work the clutch. This McLeod RXT 1200 dual-disc is rated for 1200 horsepower thanks to twin discs and the ceramic-lined friction material used on them. Most clutch manufacturers offer dual-disc systems to handle late-model drivetrains where 600+ horsepower is commonplace. Because these systems use smaller-diameter discs, the moment-of-inertia (MOI) is lower than a single-disc setup capable of handling similar horsepower. This helps to reduce pedal effort, but at the same time make it capable of holding too.

Dual Disc Clutches

“When the engine is making 600+ hp, there is going to be a high heat load put on the clutch (racing activity), and when the transmission will need to be shifted at high RPM (6500+) it is time to look at going with a dual-disc clutch system” Brian Gwin explains.

Dual-disc clutch systems have come into play more with modern engines and horsepower capability, offering a better option versus a single-disc clutch setup in more applications. A dual-disc clutch usually has a smaller diameter than a traditional single-disc clutch. This helps lower the moment of inertia (MOI) which usually helps reduce pedal effort. Typically they can handle more heat and more power than a single-disc system. Dual-disc systems help for high-horsepower vehicles that see track time but also a fair amount of street time as well but the owner doesn’t want to deal with a heavy amount of pedal effort to work the clutch.

Choosing the Right Clutch to Go with Your TREMEC Transmission
McLeod offers steel (left) and aluminum (right) flywheel options for its RXT and other clutch systems, as do most other clutch manufacturers. Deciding whether to go with an aluminum or steel flywheel depends on multiple factors including vehicle weight, what type of racing use the clutch is going to see and if weight is a critical factor. Typically aluminum flywheels aren’t recommended for vehicles primarily driven on the street because of the negative effect on drivability. And for higher performance engines in street/strip applications it is recommended a billet steel flywheel is used when the vehicle is considered heavy and inertia is crucial.

Steel vs Aluminum Flywheel

The main interface between the engine and the clutch is the flywheel. Flywheels are typically made from either steel or aluminum. Aluminum flywheels are much lighter than steel ones for obvious reasons. Most factory manual transmission vehicles have a steel flywheel because that is ideal for most street applications. But when should you look at switching to an aluminum flywheel? For higher performance engines in street/strip vehicles, a billet steel flywheel is the better option where inertia is important and/or the vehicle is a heavy one. Extra inertia in these cases from the heavier flywheel means less tendency for the engine to bog down when the clutch is released and stay in the desired RPM range for launching. Aluminum flywheels and their lighter weight/decreased inertia are ideal for lighter vehicles, road racing, roll racing (drag racing that doesn’t start from a dead stop), circle track racing and any other driving where lighter is better. Aluminum flywheels typically aren’t recommended for cars and trucks primarily driven on the street. If you’re not sure which way to go, ask the clutch manufacturer what they recommend based off your vehicle’s specifications.

Choosing the Right Clutch to Go with Your TREMEC Transmission
This is the intermediate plate from a dual-disc clutch used on a 1000+ horsepower 2003 Ford Mach 1 Mustang with a DOHC 4.6L V8 with a turbocharger. The car sees regular dragstrip competition with high-RPM launches, and the intermediate plate (along with the pressure plate and flywheel surface) shows the normal signs of the heat and friction from such hard launches. Because of the rigors this type of driving puts on a clutch, it’s imperative o select a clutch not just capable of handling the power an engine makes, but also how that power is going to be used (street/strip/etc.) and what RPM the engine will be running when the clutch is engaged/disengaged. This is also a great example of a scenario where a dual-disc is way to go instead of a single-disc clutch.

When Should You Upgrade Your Clutch?

Composition of the clutch disc friction material is important when talking about race applications, and when it’s time to upgrade from a more street-oriented clutch. When you start using a street disc more in a racing environment, the lifespan of the disc’s friction material will be greatly reduced. On the flip side, the shifting qualities of a street clutch could actually hinder overall performance of a more race-oriented car or truck. Because noise and smoothness aren’t critical factors with a race car compared to a street car, racing oriented clutch discs and pressure plates use friction materials and other parts that prioritize horsepower, heat, dead-stop launches and sharp engagements that overwhelm a street clutch.

Choosing the Right Clutch to Go with Your TREMEC Transmission
Whether it’s a singe- or dual-disc, part of choosing the right clutch is selecting one with a clutch disc(s) that’s best suited for the horsepower of the application and in what conditions it’s going to be used (street, race or street/race) so the disc material can handle that usage. Clutch discs meant for higher horsepower and racing oriented applications will have friction material designed to handle the engine’s output along with the heat generated by clutch’s operation. Clutches meant for street-only applications will feature friction material more oriented for daily driving and easy, reliable and quiet clutch operation.

What to Avoid When Installing a New Clutch

This one’s easy…FOLLOW THE INSTRUCTIONS! Before picking up a wrench (and even if you’re not installing it yourself) read the instructions included with the new clutch you buy. Besides covering the installation part, they’ll also give instructions on how to drive the car once installation is complete so the clutch is “broken-in” and ready for what you want to do. Clutch companies have an enormous wealth of knowledge, including records of how users screwed up installing a clutch so other customers can be warned not to do the same thing.

Clutch Chatter

Past clutch slippage, the most common issue encountered with clutches is clutch chatter. But what is it exactly? Clutch chatter is when the clutch disc is grabbing and skipping momentarily when taking off from a standstill. Factors that can cause clutch chatter are:

  • Contaminated disc or pressure plate
  • Transmission not being properly aligned with the engine
  • Bent or warped disc, flywheel or pressure plate
  • Launching at the wrong RPM
  • Mismatched rear end gear ratio and tire size

There can be other reasons for clutch chatter, but these are the most common.

Overall, if you have any questions about which clutch is right for your application, consult with the clutch manufacturer you’re considering. They have experts who are ready and happy to help you figure out which clutch is the right one for your car or truck.

TREMEC All-Female True Street at the 2023 NMRA Spring Break Shootout

The 2023 NMRA Spring Break Shootout hosted the first TREMEC All-Female True Street Showdown of the year. This new competition gives women a special True Street subclass to race against each other for a new dynamic in the NMRA’s most popular drag racing format. Read More “TREMEC All-Female True Street at the 2023 NMRA Spring Break Shootout”

TREMEC Stick Shift Shootout at the 2023 NMRA Spring Break Drag Race

The first TREMEC Stick Shift Shootout of 2023 had drama, firsts, and plenty of great drag racing action!

Participants with a manual-transmission car competing in NMRA’s most popular racing class, True Street, are eligible to compete in the TREMEC Stick Shift Shootout. If you’re not familiar with the True Street class, it’s open to any street-legal, Ford-powered and Ford-bodied vehicle that is street legal. From bone-stock cars and trucks to street-legal street/strip vehicles, regardless of driving experience anyone can enter and become a participant instead of just spectating at an NMRA event. Read More “TREMEC Stick Shift Shootout at the 2023 NMRA Spring Break Drag Race”

Arrington Performance Coyote-Powered, Hydrogen-Fueled 1964 Ford Falcon

Mike Copeland and his company, Arrington Performance, made headlines in 2021 with the 1948 Chevrolet Truck they built showcasing a hydrogen fuel conversion system being developed for existing internal combustion (ICE) gasoline-fueled engines. Now they’ve taken the concept to the next level with the recently completed 1964 Ford Falcon built with a modern Ford Gen 3 Coyote V8 that runs on hydrogen and is backed by a TREMEC TKX 5-speed transmission. Read More “Arrington Performance Coyote-Powered, Hydrogen-Fueled 1964 Ford Falcon”